new product v20120s, vf20120s, vb20120s & VI20120S vishay general semiconductor document number: 88993 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 high-voltage trench mos barrier schottky rectifier ultra low v f = 0.50 v at i f = 5 a features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 260 c, 40 s (for to-220ab, ito-220ab and to-262aa package) ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in high frequency inverters, switching power supplies, freewheeling diodes, or-ing diode, dc-to-dc converters and reverse battery protection. mechanical data case: to-220ab, ito-220ab, to-263ab and to-262aa epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 20 a v rrm 120 v i fsm 200 a v f at i f = 20 a 0.73 v t j max. 150 c to-220ab v20120s vf20120s VI20120S vb20120s pin 1 pin 2 pin 3 k 1 2 3 1 k 2 3 to-263ab nc a k heatsink nc a k pin 1 pin 2 pin 3 pin 1 pin 2 case pin 3 to-262aa tmbs ? ito-220ab 1 2 3 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol v20120s vf20120s vb20120s VI20120S unit maximum repetitive peak reverse voltage v rrm 120 v maximum average forward rectified current (fig. 1) i f(av) 20 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 200 a isolation voltage (ito-220ab only) from terminal to heatsink t = 1 min v ac 1500 v operating junction ans storage temperature range t j , t stg - 40 to + 150 c www.datasheet.co.kr datasheet pdf - http://www..net/
new product v20120s, vf20120s, vb20120s & VI20120S vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88993 revision: 19-may-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit breakdown voltage i r = 1.0 ma t a = 25 c v br 120 (minimum) - v instantaneous forward voltage (1) i f = 5 a i f = 10 a i f = 20 a t a = 25 c v f 0.57 0.71 0.99 - - 1.12 i f = 5 a i f = 10 a i f = 20 a t a = 125 c 0.50 0.61 0.73 - - 0.81 reverse current (2) v r = 90 v t a = 25 c t a = 125 c i r 10 6 - - a ma v r = 120 v t a = 25 c t a = 125 c - 14 300 30 a ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol v20120s vf20120s vb20120s VI20120S unit typical thermal resistance r jc 2422c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ab v20120s-e3/4w 1.88 4w 50/tube tube ito-220ab vf20120s-e3/4w 1.75 4w 50/tube tube to-263ab vb20120s-e3/4w 1.38 4w 50/tube tube to-263ab vb20120s-e3/8w 1.38 8w 800/reel tape and reel to-262aa VI20120S-e3/4w 1.45 4w 50/tube tube figure 1. maximum forward current derating curve case temperat u re (c) a v erage for w ard c u rrent (a) 20 25 15 10 5 0 0 25 50 75 100 125 150 175 v f20120s v (b,i)20120s resisti v e or ind u cti v e load mo u nted on specific heatsink figure 2. forward power loss characteristics d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 20 1 8 16 14 12 10 8 6 4 2 0 0 5 10 15 20 25 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = t p /t t p t www.datasheet.co.kr datasheet pdf - http://www..net/
new product v20120s, vf20120s, vb20120s & VI20120S vishay general semiconductor document number: 88993 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 figure 3. typical instantaneous forward characteristics figure 4. typical reve rse characteristics figure 5. typical junction capacitance 0.1 1 10 100 0 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 t a = 150 c t a = 125 c t a = 100 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t a = 25 c 0.001 0.01 0.1 1 10 100 10 20 30 40 50 60 70 8 0 90 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent (ma) t a = 150 c t a = 125 c t a = 25 c t a = 100 c 10 100 1000 10 000 0.1 1 10 100 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p figure 6. typical transient thermal impedance figure 7. typical transient thermal impedance 0.1 1 10 0.01 0.1 1 10 100 j u nction to case t - p u lse d u ration (s) transient thermal impedance (c/ w ) v (b,i)20120s 0.1 1 10 0.01 0.1 1 10 100 j u nction to case t - p u lse d u ration (s) transient thermal impedance (c/ w ) v f20120s www.datasheet.co.kr datasheet pdf - http://www..net/
new product v20120s, vf20120s, vb20120s & VI20120S vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88993 revision: 19-may-08 4 package outline dimensions in inches (millimeters) to-220ab 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15. 8 7) pi n 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.02 8 (0.70) 0.154 (3.91) 0.14 8 (3.74) 1 3 2 0.1 8 5 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.6 8 ) 0.135 (3.43) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pi n 3 2 1 0.404 (10.26) 0.3 8 4 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.5 8 0 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.191 (4. 8 5) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0. 8 9) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.3 8 ) 0.105 (2.67) 0.095 (2.41) 0.02 8 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.0 8 ) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4. 8 3) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) to-262aa 0.401 (10.19) 0.3 8 1 (9.6 8 ) 0.1 8 5 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) k 123 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) pi n 0.411 (10.45) max. 0.250 (6.35) mi n . 30 (typ.) (ref.) 0.035 (0.90) 0.02 8 (0.70) 0.205 (5.20) 0.195 (4.95) 0.104 (2.65) 0.096 (2.45) 0.057 (1.45) 0.045 (1.14) 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) to-263ab mo u nting pad layo u t 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.0 8 (2.032) mi n . 0.15 (3. 8 1) mi n . 0.33 ( 8 .3 8 ) mi n . 0.42 (10.66) mi n . n ca k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4. 8 3) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15. 8 5) 0.591 (15.00) 0.037 (0.940) 0.027 (0.6 8 6) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 ( 8 .13) 0.411 (10.45) 0.3 8 0 (9.65) 0.245 (6.22) mi n . www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
